manualshive.com logo in svg

HPE XP P9000, User Manual, Page: 245 / 286

Share
Download
HPE XP P9000 User Manual Download Page 245

Item

Description

External User Group
Mapping - Primary Port
Number

Displays the port number of the LDAP server.

External User Group
Mapping - Base DN

Specify a base DN to search for users to authenticate.

Available characters: Alphanumeric characters (ASCII characters) and all
symbols.

• Hierarchical model: Specify a DN of hierarchy that includes all the targeted

users for searching.

• Flat model: Specify a DN of hierarchy that is one level up of the targeted

user for searching.

You can enter alphanumeric characters and all symbols. Note, however, that
when you enter symbols like the following, you need to use a backslash to
escape for each ; , < = > \ / "In some cases, you may need to use a
backslash and an ASCII character to escape.

• \ -> \5c (hexadecimal)

• / -> \2f (hexadecimal)

• "-> \22 (hexadecimal)

External User Group
Mapping - Search User's
DN

Search for a user by specifying a DNAvailable characters: Alphanumeric
characters (ASCII characters) and all symbols.

If you specify 

sAMAccountName

 in External User Group Mapping - User

Name Attribute, or if you select 

Enable

 in External User Group Mapping, this

item must be specified.

If you select 

Disable

 in External User Group Mapping, this item is disabled.

You can enter alphanumeric characters and all symbols. Note, however, that
when you enter symbols like the following, you need to use a backslash to
escape for each ; , < = > \ / "In some cases, you may need to use a
backslash and an ASCII character to escape.

• \ -> \5c (hexadecimal)

• / -> \2f (hexadecimal)

• "-> \22 (hexadecimal)

External User Group
Mapping - Password

Displays asterisks (*) to mask the password of the user for searching.

External User Group
Mapping - Timeout

Displays the number of seconds before connection to the LDAP server times
out.

External User Group
Mapping - Retry Interval

Displays the retry interval in seconds when the connection to the LDAP server
fails.

Table Continued

Remote Web Console GUI reference (main window) 

245

Summary of Contents for XP P9000































































































































































































































































































Reviews:

No comments