manualshive.com logo in svg

HPE XP P9000, User Manual, Page: 225 / 286

Share
Download
HPE XP P9000 User Manual Download Page 225

Item

Description

External User Group
Mapping - Number of Retries

Specify retry times when the connection to the LDAP server fails.

External User Group
Mapping - Base DN

Specify a base DN to search for users to authenticate.

Available characters: Alphanumeric characters (ASCII characters) and all
symbols.

• Hierarchical model: Specify a DN of hierarchy that includes all the

targeted users for searching.

• Flat model: Specify a DN of hierarchy that is one level up of the

targeted user for searching.

You can enter alphanumeric characters and all symbols. Note, however,
that when you enter symbols like the following, you need to use a
backslash to escape for each ; , < = > \ / "In some cases, you
may need to use a backslash and an ASCII character to escape.

• \ -> \5c (hexadecimal)

• / -> \2f (hexadecimal)

• "-> \22 (hexadecimal)

External User Group
Mapping - Search User's DN

Search for a user by specifying a DN.

Available characters: Alphanumeric characters (ASCII characters) and all
symbols.

If you specify 

sAMAccountName

 in External User Group Mapping - User

Name Attribute, or if you select Enable in External User Group Mapping,
this item must be specified.

You can enter alphanumeric characters and all symbols. Note, however,
that when you enter symbols like the following, you need to use a
backslash to escape for each ; , < = > \ / "In some cases, you
may need to use a backslash and an ASCII character to escape.

• \ -> \5c (hexadecimal)

• / -> \2f (hexadecimal)

• "-> \22 (hexadecimal)

External User Group
Mapping - Password

Search for a user by specifying their password. Specify the same
password that is registered in the LDAP server.

You can specify ASCII code characters and the following symbols:! # $ %
and ' ( ) * + - . = @ \ ^ _ |If you specify 

sAMAccountName

 in External

User Group Mapping - User Name Attribute, or if you select Enable in
External User Group Mapping, this item must be specified.

Table Continued

Remote Web Console GUI reference (main window) 

225

Summary of Contents for XP P9000































































































































































































































































































Reviews:

No comments