HPE XP P9000 User Manual Download Page 153

Page: 153 / 286

Procedure

Click a function in the resource tree in the Explorer.

If necessary, choose a tab and use a filter to narrow down the items in the table.

Select an item in the table, and click a button to open a wizard.

Set options in the wizard, and click

Finish

to confirm the setting.

Enter a task name, and click

Apply

to apply the setting to the storage system. The setting is queued

as a task and performed in order.

TIP:

To open the task window after closing the wizard, select

Go to tasks window for status

and click

Apply

in the wizard.

Figure 21: Using wizard buttons

Open the task window to verify the result of the operation. A task can be suspended or canceled if the
processing of the task is not started.

Main window controls

Buttons

The following figure shows the Back and Next buttons that appear at upper left of the main window:

Figure 22: Back and Next buttons in main window

Remote Web Console GUI reference (main window)

153

Summary of Contents for XP P9000































































































































































































































































































Search results

Summary of Contents for XP P9000

Reviews:

HPE XP P9000, User Manual, Page: 153 / 286

Search results

Summary of Contents for XP P9000

Reviews: