manualshive.com logo in svg

HPE XP P9000, User Manual, Page: 240 / 286

Share
Download
HPE XP P9000 User Manual Download Page 240

Item

Description

DNS Lookup

Specify whether to search for the Kerberos server using the information
registered in the SRV records in the DNS server.

• Enable: Performs the search using information registered in the SRV

records in the DNS server.

• Disable: Performs the search using the host name and the port number.

Realm Name

Specify a default realm name.

You can specify ASCII code characters and hyphens (-).

Host Name

Specify a host name of the Kerberos server.

You can specify ASCII code characters, hyphens (-), and periods (.).If you
select Enable in DNS Lookup, this item is disabled.

Port Number

Specify a port number of the Kerberos server.

If you select Enable in DNS Lookup, this item is disabled.

Clock Skew

Specify an acceptable range of time difference between the SVP and the
Kerberos server.

Timeout

Specify the number of seconds before connection to the Kerberos server
times out.

Secondary Server

Specify whether to use a secondary Kerberos server.

• Enable: Uses the secondary server.

• Disable: Does not use the secondary server.

If you specify Enable in DNS Lookup, this item is disabled.

Secondary Server - Host
Name

Specify a name of the secondary Kerberos server.

You can specify ASCII code characters, hyphens (-), and periods (.).If you
select Enable in DNS Lookup, or if you select Disable in Secondary Server,
this item is disabled.

Secondary Server - Port
Number

Specify a port number of the secondary Kerberos server.

If you select Enable in DNS Lookup, or if you select Disable in Secondary
Server, this item is disabled.

External User Group
Mapping

Specify whether to connect an authentication server to an authorization
server.

• Enable: Connects an authentication server to an authorization server.

• Disable: Does not connect an authentication server to an authorization

server.

Table Continued

240

Remote Web Console GUI reference (main window)

Summary of Contents for XP P9000































































































































































































































































































Reviews:

No comments