manualshive.com logo in svg

HPE XP P9000, User Manual, Page: 123 / 286

Share
Download
HPE XP P9000 User Manual Download Page 123

Item

Description

Number of LUNs

The number of LU paths defined to the host group.

Number of LDEVs

The number of logical volumes that are accessible from the
hosts in the host group.

Number of PGs

The number of parity groups with logical volumes that are
accessible from the hosts in the host group.

Number of DKAs

The number of disk adapters controlling the parity groups
where the logical volumes that are accessible from the hosts in
the host group belong.

Total LDEV Capacity (MB)

Total capacity of the logical volumes accessible from the hosts
in the host group.This is the total capacity of LDEVs referred to
in “Number of LDEVs”.

Port Security

Security of the port.

Host Mode

Host mode of the host group.

Host Mode Option

Host mode option of the host group.

Host mode options are separated by semicolons (;) when more
than one option is specified.

Number of Hosts

The number of the hosts in the host group.

Hosts report

This report is about hosts. A record is created for each host. When a host is registered to more than one
port, more than one record shows information about the same host.

Table 31: Hosts report

Item

Description

Port Location

Name of the port.

Port Internal WWN

WWN of the port.

Port Security

Security of the port.

Host Group

Name of the host group.

Host Mode

Host mode of the host group.

Host Mode Option

Host mode option of the host group.

Host mode options are separated by semicolons (;) when more
than one option is specified.

Table Continued

Storage configuration reports

123

Summary of Contents for XP P9000































































































































































































































































































Reviews:

No comments