The 4 x 1GbE network ports are used for the storage network and to connect the system to infrastructure
services, such as Active Directory, DNS, and NTP. The ports can be configured as segregated network ports
or a network team. Ensure that your switch is prepared for either configuration.
Rear view of each model with legend and instructions
The rear view consists of:
1.
Network Ports
2.
iLO Port
1
2
If you have purchased additional interface cards for your StoreEasy 1X60, the following table guides you on
where to install them. The numerical values indicate the order of installation.
Description
PCIe Slot 1
(x8)
PCIe Slot 2
(x16)
PCIe Slot 3
(x8)
FlexLOM
Slot
PCIe Slot
4 (x8)
1
PCIe Slot
5 (x16)
1
PCIe Slot
6 (x8)
1
Primary Riser
HPE M.2 Kit
with 2 x M.2
SSDs
Slot Not
Available
Slot Not
Available
X
Slot Not
Available
Slot Not
Available
Slot Not
Available
Slot Not
Available
FlexLOM
Slot Not
Available
1
PCIe x16
1
Slot Not
Available
1
PCIe x8 or less 1
2
1
2
3
Slots for Secondary Riser require that the second processor is installed before they are available for use. PCIe Slot 4 and
PCIe Slot 5 are not available when using the riser with the 2 x SFF cage.
PCIe x16 on Primary Riser is only available on the StoreEasy 1660 system. The StoreEasy 1860 system uses this slot for
the SAS expander card.
Power up
Power up the storage system using power button on the front panel as shown in the following figure:
1
1
Power button
Rear view of each model with legend and instructions
19
