HPE StoreEasy 1X60 Storage Administrator'S Manual Download Page 124

Page: 124 / 183

Item LED

Status

Definition

Flashing white

The drive ejection request is pending.

Off

The drive has been ejected.

Power

Solid green

Do not remove the drive. Drive must be ejected from the PCIe bus prior
to removal.

Flashing green

The drive ejection request is pending.

Off

The drive has been ejected.

uFF drive components and LEDs

Item

Description

Status

Locate

• Off—Normal

• Solid blue—The drive is being identified by a host

application

• Flashing blue—The drive firmware is being updated

or requires an update

uFF drive ejection latch

Removes the uFF drive when released

Do not remove LED

• Off—OK to remove the drive. Removing the drive

does not cause a logical drive to fail.

• Solid white—Do not remove the drive. Removing

the drive causes one or more of the logical drives to
fail.

Table Continued

124

uFF drive components and LEDs

Summary of Contents for StoreEasy 1X60 Storage
























































































































































































Search results

Summary of Contents for StoreEasy 1X60 Storage

Reviews:

Related manuals for StoreEasy 1X60 Storage

Brands by name

Popular brands

HPE StoreEasy 1X60 Storage, Administrator'S Manual

Search results

Summary of Contents for StoreEasy 1X60 Storage

Reviews:

Related manuals for StoreEasy 1X60 Storage

Brands by name

Popular brands