HPE StoreEasy 1X60 Storage Administrator'S Manual Download Page 146

Page: 146 / 183

• Embedded controllers

Enabled through System Utilities and configured through HPE Smart Storage Administrator (Intelligent
Provisioning)

• Type-a controllers

Type-a controllers install in the type-a smart array connector.

• Type-p controllers

Type-p controllers install in a PCIe expansion slot

Installing a storage controller

Prerequisites

Before installing this option, be sure that you have the following:

The components included with the hardware option kit

Procedure

1. Power down the server

Remove all power:

Disconnect each power cord from the power source.

Disconnect each power cord from the server.

Do one of the following:

•

Extend the server from the rack

•

Remove the server from the rack

4. Remove the access panel

Do one of the following:

•

Remove the air baffle

•

If installed, remove the 4LFF midplane drive cage

Do one of the following:

• For Type-a Smart Array controllers, install the controller into the Smart Array connector.

146

Installing a storage controller

Summary of Contents for StoreEasy 1X60 Storage
























































































































































































Search results

Summary of Contents for StoreEasy 1X60 Storage

Reviews:

Related manuals for StoreEasy 1X60 Storage

Brands by name

Popular brands

HPE StoreEasy 1X60 Storage, Administrator'S Manual

Search results

Summary of Contents for StoreEasy 1X60 Storage

Reviews:

Related manuals for StoreEasy 1X60 Storage

Brands by name

Popular brands