HPE StoreEasy 1X60 Storage Administrator'S Manual Download Page 168

Page: 168 / 183

Proceed to

#unique_238

Preparing the server for operation

Procedure

Install any options or cables previously removed to access the TPM connector.

Do one of the following:

•

Install the air baffle

•

Install the 4LFF midplane drive cage

3. Install the access panel

Install the server in the rack.

Connect power cords to the server.

Press the Power On/Standby button.

Enabling the Trusted Platform Module

When enabling the Trusted Platform module, observe the following guidelines:

• By default, the Trusted Platform Module is enabled as TPM 2.0 when the is powered on after installing it.

• In UEFI Boot Mode, the Trusted Platform Module can be configured to operate as TPM 2.0 or TPM 1.2.

• In Legacy Boot Mode, the Trusted Platform Module configuration can be changed between TPM 1.2 and

TPM 2.0, but only TPM 1.2 operation is supported.

Enabling the Trusted Platform Module as TPM 2.0

168

Enabling the Trusted Platform Module

Summary of Contents for StoreEasy 1X60 Storage
























































































































































































Search results

Summary of Contents for StoreEasy 1X60 Storage

Reviews:

Related manuals for StoreEasy 1X60 Storage

Brands by name

Popular brands

HPE StoreEasy 1X60 Storage, Administrator'S Manual

Search results

Summary of Contents for StoreEasy 1X60 Storage

Reviews:

Related manuals for StoreEasy 1X60 Storage

Brands by name

Popular brands