Property
Description
General
Name
Displays the name of the network team interface using which the user identifies the
Network Team Interfaces.
VLAN ID
Displays the Virtual LAN ID number which is the combination of one or more physical
network interface or adapter.
0 VLAN ID is the default VLAN. Primary VLAN is determined by Windows which
cannot be deleted. The primary VLAN ID cannot be modified any VLAN ID other than
0.
Primary
Displays the Primary IP Address of the network team interface.
Network Team
Displays the link to the network Team associated. Click on this link to view more
details about the network team.
IP Configuration
Mode
Represents the Static IP routing or DHCP based routing that is used to configure a
Network Team Interfaces. You can select
DHCP
(the default) so that the IP address
will be assigned by a DHCP server on the network or, select
Static IP
to statically
configure an address, subnet mask, and default gateway.
IPv4 Address
Specifies the address of the IPv4 used by the operating system that is being
deployed.
Subnet Mask
It is a mask which determines to what subnet an IP address belongs. It is a 32-bit
number which masks an IP address. The subnet mask divides the IP address into
network address and host address.
Gateway
A gateway can translate the protocol of one network to a different protocol used by
another network. The networks that use different types of hardware and different
protocols, such as TCP/IP and OSI, can communicate with each other through a
gateway.
DNS Configuration
Mode
Static or DHCP.
Primary
Represents the default DNS server. These DNS servers has IPv4 address and apply
across all port sets and subnets defined within the configuration.
Secondary
Represents the Secondary DNS server if primary DNS server is unavailable.
Tertiary
Tertiary server is used if the primary and secondary DNS servers are unavailable.
The following user icons are available in the
Network Team Interface
page.
Icon
Function
Description
Edit
Allows the user to modify the existing network interfaces where you change the
VLAN ID and the IP Settings.
Back
button
Allows the user to go to the network team interfaces home page.
The Network Team Interface details page displays the state of the network team interface running from
unknown, present, started to disabled as shown in the following image.
Networking
87
