HPE StoreEasy 1X60 Storage Administrator'S Manual Download Page 157

Page: 157 / 183

Installing a 12G SAS Expander Card

• For 24SFF configurations, install 8SFF front drive cages in boxes 1 and 2.

• For configurations including a 2SFF rear drive cage, install the drive cage over the power supplies.

• HPE recommends installing the SAS expander card into slot 3 of the primary PCIe riser expansion card.

• To ensure that cables are connected correctly, observe the labels on the cable and port.

• Be sure that you have the latest firmware for the controllers and the expander card. To download the latest

firmware, see the

Hewlett Packard Enterprise website

Prerequisites

Before installing this option, be sure that you have the following:

• The components included with the hardware option kit

• Storage cables for each drive box

• A storage controller

Procedure

Power down the server

Remove all power:

Disconnect each power cord from the power source.

Disconnect each power cord from the server.

Do one of the following:

•

Extend the server from the rack

•

Remove the server from the rack

Remove the access panel

Remove the air baffle

Remove the fan cage

Remove the riser cage.

Installing a 12G SAS Expander Card

157

Summary of Contents for StoreEasy 1X60 Storage
























































































































































































Search results

Summary of Contents for StoreEasy 1X60 Storage

Reviews:

Related manuals for StoreEasy 1X60 Storage

Brands by name

Popular brands

HPE StoreEasy 1X60 Storage, Administrator'S Manual

Search results

Summary of Contents for StoreEasy 1X60 Storage

Reviews:

Related manuals for StoreEasy 1X60 Storage

Brands by name

Popular brands