HP ProLiant server errors 54
209-DIMM Configuration Error- Installed DIMM configuration does NOT support
configured AMP Mode
...System will operate in Advanced ECC Mode.
Action:
Ensure DIMM configuration meets requirements for configured AMP mode.
210-Memory Board Power Fault on board X
Possible Cause
: A problem exists with a memory board powering up properly.
Action
: Exchange DIMMs and retest. Replace the memory board if problem persists.
210-Memory Board Failure on board X
Possible Cause
: A problem exists with a memory board powering up properly.
Action
: Exchange DIMMs and retest. Replace the memory board if problem persists.
210- Processor X: Quick Path Interconnect (QPI) Link Degradation
...A QPI link on this processor is operating in a degraded performance state.
212-Processor Cache Size Mismatch Detected - System Performance may be Erratic!
Possible cause:
Two processors with different cache sizes are installed.
Action:
Remove one of the processors.
212-Processor Failed, Processor X
Possible Cause
: Processor in slot
X
failed.
Action
:
1.
Run Insight Diagnostics.
CAUTION:
Before removing or replacing any processors, be sure to follow the guidelines
provided in "Performing processor procedures in the troubleshooting process." Failure to follow
the recommended guidelines can cause damage to the system board, requiring replacement of
the system board.
2.
Replace failed components as indicated.
222- DIMM Configuration Error- The DIMM configuration is incorrect and prevents
the system from initializing memory
...System video output may have additional information regarding failure. The system is halted.
223- Memory Error- A memory error occurred which prevents the system from
initializing memory
...System video output may have additional information regarding failure. The system is halted.
228- DIMM Configuration Error - Processor X, Channel Y
- Memory channel not populated in correct order. See User Guide
