manualshive.com logo in svg

HP ProLiant Gen9, Troubleshooting Manual

Share
Download
HP ProLiant Gen9 Troubleshooting Manual Download Page 123

 

HP Smart Array errors  123 

Log message: 

The Smart Array controller <controller name / slot information> is not 

redundant because it is of a different firmware revision than its' partner 

controller.

 

Message Id: 24645

 

Severity: Error 
Log message: 

The Smart Array controller <controller name / slot information> is not 

redundant because it is using a different cache size than its' partner controller.

 

Message Id: 24646

 

Severity: Error 
Log message: 

The Smart Array controller <controller name / slot information> is not 

redundant because its' partner controller has reported a cache failure.

 

Message Id: 24647

 

Severity: Error 
Log message: 

The Smart Array controller <controller name / slot information> is no 

longer redundant because this controller and its' partner controller can no longer 

see all the physical drives.

 

Message Id: 24648

 

Severity: Error 
Log message: 

The Smart Array controller <controller name / slot information> is no 

longer redundant because one or more drives has been determined not to be able 

to support redundant controller operations.

 

Message Id: 24649

 

Severity: Warning 
Log message: 

The Smart Array controller <controller name / slot information> is no 

longer redundant because an expand operation is in progress. The controller will 

become redundant once again once the expand operation has completed.

 

 

Message identifiers 24650-24674 

Message Id: 24650

 

Severity: Informational 
Log message: 

SnapShot ID <ID number> of logical drive <logical drive number> on 

<external specification> array controller <controller name / slot information> 

has been created.

 

<external specification> values: 

•

 

“

the external controller attached to

” 

•

 

"" 

Message Id: 24651

 

Severity: Error 
Log message: 

SnapShot ID <ID number> of logical drive <logical drive number> on 

<external specification> array controller <controller name / slot information> 

failed and has been deleted.

 

Summary of Contents for ProLiant Gen9



























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands