HP iLO errors 235
HP iLO errors
iLO overview
This section provides information about iLO error messages. For the latest information on iLO error messages,
go to the HP website (
http://www.hp.com/go/ilo
) to download the latest iLO user guide.
iLO POST LED indicators
During the initial boot of iLO, the POST LED indicators flash to display the progress through the iLO boot
process. After the boot process is complete, the HB LED flashes in one second intervals. LED indicators (1
through 6) illuminate after the system has booted to indicate a hardware failure. If a hardware failure is
detected, reset iLO. For the location of the LED indicators, see the server documentation.
A runtime failure of iLO is indicated by HB constantly remaining in either the On or Off state. A runtime failure
of iLO can also be indicated by a repeated flashing pattern on all eight LEDs. If a runtime error occurs, reset
iLO.
The LED indicators have the following assignments.
HB
7
6
5
4
3
2
1
LED indicator
POST code (activity
completed)
Description
Failure indicated
None
00
Set up chip selects
—
2
02 - Normal operation Scrub done
—
HB and 2
82
Kernel launch
Subsystem startup failed if this
status remains for extended
period of time (~60 seconds)
5,4,3,2,1 and blinking 0F
Main error - recovery
The main payload is corrupt;
the kernel is running flash
recovery.
HB, 7, and 6 steady
5,4,3,2,1 blinking
E0
Kernel error
Failure to find and load a
kernel
HB
—
Flashes as the iLO
processor executes firmware
code. It does not change the
value of the lower seven
LEDs.
—
Event log entries
Event log display
Event log explanation
Server power removed
Displays when the server power is removed.
Browser login:
IP address
Displays the IP address for the browser that logged in.
