manualshive.com logo in svg

HP ProLiant Gen9, Troubleshooting Manual

The HP ProLiant Gen9 server series offers unmatched performance and stability for businesses of all sizes. Ensure seamless setup and optimal usage of this powerful hardware with our comprehensive User Manual. Download the user manual for free from our website and maximize the potential of your Gen9 server effortlessly.

Share
Download
background image

 

HP Smart Array errors  150 

•

 

NOT_READY - Drive is not ready and will not spin up.

 

•

 

HARDWARE_ERROR - Drive is returning a Hardware Error sense key; controller 

unable to get drive back online.

 

•

 

ABORTED_COMMAND - Drive is returning an Aborted Command sense key; controller 

unable to get drive back online.

 

•

 

WRITE_PROTECTED - Drive is returning a sense key indicating it is write 

protected.

 

•

 

SPIN_UP_FAILURE_IN_RECOVER - “Start Unit” command failed during error 

recovery

 

•

 

REBUILD_WRITE_ERROR - Drive failed write command after multiple retries 

during rebuild.

 

•

 

TOO_SMALL_IN_HOT_PLUG - Replacement drive is too small for configured 

volume(s).

 

•

 

BUS_RESET_RECOVERY_ABORTED - Unable to communicate with drive after multiple 

bus resets and retries; may be due to this drive or another drive that is 

corrupting the parallel SCSI bus.

 

•

 

REMOVED_IN_HOT_PLUG - Drive has been hot-removed.

 

•

 

INIT_REQUEST_SENSE_FAILED - “Request Sense” command failed during device 

discovery/initialization.

 

•

 

INIT_START_UNIT_FAILED - “Start Unit” command failed during device 

discovery/initialization.

 

•

 

INQUIRY_FAILED - “Inquiry” command failed after multiple retries.

 

•

 

NON_DISK_DEVICE - Attached device is not a hard disk per its inquiry data.

 

•

 

READ_CAPACITY_FAILED - “Read Capacity” command failed after multiple 

retries.

 

•

 

INVALID_BLOCK_SIZE - Drive indicates it is not formatted for 512 bytes per 

sector.

 

•

 

HOT_PLUG_REQUEST_SENSE_FAILED - “Request Sense” command failed after drive 

hot-added.

 

•

 

HOT_PLUG_START_UNIT_FAILED - “Start Unit” command failed after drive 

hot-added)

 

•

 

WRITE_ERROR_AFTER_REMAP - After reassigning a media error reported during 

a write command, the write command failed with another media error.

 

•

 

INIT_RESET_RECOVERY_ABORTED - Unable to communicate with drive during 

initialization after multiple bus resets and retries; may be due to this drive 

or another drive that is corrupting the parallel SCSI bus.

 

•

 

DEFERRED_WRITE_ERROR - Drive with write cache enabled reported that it could 

not complete a write command that it previously indicated was successful [lost 

data].

 

•

 

MISSING_IN_SAVE_RIS - Could not write to reserved configuration sectors after 

multiple retries.

 

•

 

WRONG_REPLACE - A hot-plug tape drive was plugged in as a replacement into 

a drive bay that a hard disk was removed from.

 

Summary of Contents for ProLiant Gen9



























































































































































































































































































































































































































Reviews:

No comments

Related manuals for ProLiant Gen9

D-Link DP-300+ User Manual preview
DP-300+
Brand: D-Link Pages: 38
D-Link Epress EtherNetwork DP-301P+ Datasheet preview
Epress EtherNetwork DP-301P+
Brand: D-Link Pages: 2
G-Technology G-DRIVE ev ATC Product Manual preview
G-DRIVE ev ATC
Brand: G-Technology Pages: 35
B&B ES1AWB Instruction Manual preview
ES1AWB
Brand: B&B Pages: 55
Bull NovaScale T840 E2 User Manual preview
NovaScale T840 E2
Brand: Bull Pages: 210
Digi PortServer CM User Manual preview
PortServer CM
Brand: Digi Pages: 126
Supermicro SuperServer 2029BT-HNC0R User Manual preview
SuperServer 2029BT-HNC0R
Brand: Supermicro Pages: 148
DataCard 500 Datasheet preview
500
Brand: DataCard Pages: 2
QNAP TS-409 User Manual preview
TS-409
Brand: QNAP Pages: 203
Alcatel OmniPCX Quick Start Manual preview
OmniPCX
Brand: Alcatel Pages: 2
Planet FPS-1012N Quick Installation Manual preview
FPS-1012N
Brand: Planet Pages: 28
Lantronix Com Port Redirector User Manual preview
Com Port Redirector
Brand: Lantronix Pages: 31
Webster MultiPort/LT User'S Reference Manual preview
MultiPort/LT
Brand: Webster Pages: 114
Oracle netra X5-2 Security Manual preview
netra X5-2
Brand: Oracle Pages: 22
Aberdeen AberNAS 120 Manual preview
AberNAS 120
Brand: Aberdeen Pages: 89
LaCie 301417U - Big Disk Network NAS Server User Manual preview
301417U - Big Disk Network NAS Server
Brand: LaCie Pages: 48
IBM Power System AC922 Installing preview
Power System AC922
Brand: IBM Pages: 138
TANDBERG S3.1 Administrator'S Manual preview
S3.1
Brand: TANDBERG Pages: 131

Brands by name

Popular brands

Load more brands