manualshive.com logo in svg

HP ProLiant Gen9, Troubleshooting Manual

Share
Download
HP ProLiant Gen9 Troubleshooting Manual Download Page 153

 

HP Smart Array errors  153 

Severity: Informational 
Log message: 

The external Smart Array controller located in the MSA chassis labeled 

as <chassis label> has reported that fan module <module number> was <inserted 

/ removed>.

 

The external Smart Array controller is attached to the host side Smart Array 

controller <controller name / slot information>.

 

Message Id: 24782

 

Severity: Error 
Log message: 

The external Smart Array controller located in the MSA chassis labeled 

as <chassis label> has reported that fan module <fan module number> has failed. 

The external Smart Array controller may attempt to shut down power and/or spin 

down the installed disk drive(s).

 

The external Smart Array controller is attached to the host side Smart Array 

controller <controller name / slot information>.

 

Message Id: 24783

 

Severity: Informational 
Log message: 

The external Smart Array controller located in the MSA chassis labeled 

as <chassis label> has reported that fan module <fan module number> is reporting 

a degraded condition.

 

The external Smart Array controller is attached to the host side Smart Array 

controller <controller name / slot information>.

 

Message Id: 24784

 

Severity: Informational 
Log message: 

The external Smart Array controller located in the MSA chassis labeled 

as <chassis label> has reported that fan module <fan module number> is now 

operational.

 

The external Smart Array controller is attached to the host side Smart Array 

controller <controller name / slot information>.

 

Message Id=24785

 

Severity: Informational 
Log message: 

The external Smart Array controller located in the MSA chassis labeled 

as <chassis label> has reported that a previously failed storage enclosure 

processor (SEP) is now responding and operational. 

 

The external Smart Array controller is attached to the host side Smart Array 

controller <controller name / slot information>.

 

Message Id: 24786

 

Severity: Error 
Log message: 

The external Smart Array controller located in the MSA chassis labeled 

as <chassis label> has reported that a storage enclosure processor (SEP) has 

failed. 

 

The external Smart Array controller is attached to the host side Smart Array 

controller <controller name / slot information>.

 

Message Id: 24787

 

Summary of Contents for ProLiant Gen9



























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands