Contents 28
These symbols, on power supplies or systems, indicate that the equipment is supplied
by multiple sources of power.
WARNING:
To reduce the risk of injury from electric shock, remove all power cords
to completely disconnect power from the system.
Rack warnings
WARNING:
To reduce the risk of personal injury or damage to equipment, always ensure that the
rack is adequately stabilized before extending a component outside the rack. A rack may become
unstable if more than one component is extended for any reason. Extend only one component at a
time.
WARNING:
To reduce the risk of personal injury or damage to the equipment, be sure that:
•
The leveling jacks are extended to the floor.
•
The full weight of the rack rests on the leveling jacks.
•
The stabilizers are attached to the rack, if it is a single rack installation.
•
The racks are coupled together in multiple rack installations.
WARNING:
When installing the server in a Telco rack, make certain that the rack frame is
adequately secured to the building structure at the top and bottom.
WARNING:
To reduce the risk of personal injury or damage to the equipment, at least two people
are needed to safely unload the rack from the pallet. An empty 42U rack weighs 115 kg (253 lb),
is over 2.1 m (7 ft) tall, and may become unstable when being moved on its casters. Do not stand
in front of the rack as it rolls down the ramp from the pallet. Handle the rack from both sides.
CAUTION:
This ProLiant server is intended for rack-mount operation. The server bezel is made from
glossy material. For safety purposes, do not place the server in the visual field of users to prevent
any accidents arising from light bouncing off the bezel’s surface.
ACHTUNG:
Entsprechend der Bildschirmabeitsplatzverordnung, darf das Gerät nicht im Gesichtsfeld
des Bedieners aufgestellt werden, da das Gehäuse eine glänzende Front aufweist.
Electrostatic discharge information
An electrostatic discharge (ESD) can damage static-sensitive devices or microcircuitry. Proper
packaging and grounding techniques are necessary precautions to prevent damage. To prevent
electrostatic damage, observe the following precautions:
•
Transport products in static-safe containers such as conductive tubes, bags, or boxes.
•
Keep electrostatic-sensitive parts in their containers until they arrive at static-free stations.
•
Cover workstations with approved static-dissipating material. Use a wrist strap connected to the
work surface, and properly grounded (earthed) tools and equipment.
•
Keep work area free of nonconductive materials, such as ordinary plastic assembly aids and
foam packing.
•
Make sure that you are always properly grounded (earthed) when touching a static-sensitive
component or assembly.
All manuals and user guides at all-guides.com
Summary of Contents for ProLiant DL140
