background image

 

V1.00.01 

 

Softing Industrial Automation GmbH 
Richard-Reitzner-Allee 6 
D-85540 Haar 
Tel.:  (++49) 89/4 56 56-0 
Fax.:  (++49) 89/4 56 56-399 
http://www.softing.com 

 

 
 

 
 

 
 

CANpro PCI Express 

(single channel) 

 

Hardware User Manual 

 

 
Part number: CAN-PRO1-PCIE  

 

©

 Copyright Softing Industrial Automation GmbH, Munich Germany 

 
 

 

 
 
 
 
 
 
 
 
 
 
 
 
Information in this document is subject to change without notice.

Summary of Contents for CAN-PRO1-PCIE

Page 1: ...40 Haar Tel 49 89 4 56 56 0 Fax 49 89 4 56 56 399 http www softing com CANpro PCI Express single channel Hardware User Manual Part number CAN PRO1 PCIE Copyright Softing Industrial Automation GmbH Munich Germany Information in this document is subject to change without notice ...

Page 2: ... PRO1 PCIE hardware for the first time 1 3 Hardware and driver installation Once the software setup is finished please shut down the PC and follow the steps listed below to install the CAN PRO1 PCIE hardware NOTE To prevent damage to the CAN PRO1 PCIE or to the PC discharge yourself on a grounded object such as the metal housing of the PC before touching the board Make sure that the PC and all per...

Page 3: ...e Manager SCIM For more details on the driver configuration click Start All Programs CAN Runtime System Configuration SCIM_Manual 1 5 Application Software How to use CAN PRO1 PCIE and how to write application software is described in the Software Manual To open this manual click Start All Programs CAN CAN_API DOC Softing Layer2 2 CAN Connector Pin Assignment Connector pinning complies to CiA stand...

Page 4: ...ments A shielded cable must be used In addition the cable shield must be grounded properly 6 Technical data Unit PCI Express card acc to PCIe specifications r1 0a and CEM 1 1 CPU XC161 40 MHz with internal TwinCAN CAN controller Memory 256 kbytes XC161 on chip Flash 512 kbytes RAM PC interface PCI Express single lane 512 kbytes shared RAM PC interrupt controlled by the operating system CAN interfa...

Reviews: