Contents 70
Boot-time diagnostic screen
The boot-time diagnostic screen displays basic and important information about the current server
configuration and is necessary for troubleshooting and may be required when asking for technical
support. This information includes:
•
Processor specifications
•
BIOS version and release date
•
BMC firmware version
•
Size of the system and video memory, as well
as the memory size allotted for the cache
RAM and option ROM
•
Serial port base I/O address
•
Available hard drives and expansion boards
•
Server asset tag and serial number
•
MAC address of each of the three LAN ports
It is recommended that you check this screen during the initial system setup and each time you install,
remove, or upgrade accessories.
To view the boot-time diagnostic screen:
You first need to enable the display of the diagnostic screen during bootup. Follow the steps below.
1.
In the Main menu screen, select
Boot Features
.
2.
Select the
Summary Screen
field.
3.
Press the plus (+) or minus (-) key to set the field to
Enabled
.
4.
Press
F10
to save the changes you made and close the Setup Utility.
5.
Reboot the server.
The diagnostic screen is displayed briefly at the end of POST.
6.
Press the
Pause/Break
key to continue displaying the screen until another key is pressed.
7.
Press any key to continue with the system bootup.
All manuals and user guides at all-guides.com
Summary of Contents for ProLiant DL140
