manualshive.com logo in svg

HP photosmart 850, Command Reference Manual, Page: 78 / 136

Share
Download
HP photosmart 850 Command Reference Manual Download Page 78

 

73 

Field Description

Bridge-Aggregation1 
Load-Sharing Mode 

Link-aggregation load sharing mode of Layer 2 aggregation group 1. 

•

 

By default, this field displays the global link-aggregation load sharing 

modes. 

•

 

If you have configured a link-aggregation load sharing mode 

specifically for this aggregation group, this field displays the 
configured mode.  

Layer 2 traffic: destination-mac 
address, source-mac address 

Default link-aggregation load sharing mode for Layer 2 traffic. In this 
sample output, Layer 2 traffic is load shared based on source and 

destination MAC addresses.

 

 

display link-aggregation member-port 

Use 

display link-aggregation member-port

 to display detailed link aggregation information for the 

specified member ports. If you do not specify a port, the command displays detailed link aggregation 

information for all member ports. 

Syntax 

display link-aggregation member-port 

[ 

interface-list

 ] [ 

|

 { 

begin

 | 

exclude

 | 

include

 } 

regular-expression

 ] 

Views 

Any view 

Default command level 

1: Monitor level 

Parameters 

interface-list

: Specifies a list of ports in the format 

interface-type interface-number1

 [

 to 

interface-type 

interface-number2

 ]. 

interface-type

 

interface-number

 specifies an interface by its type and number. 

|

: Filters command output by specifying a regular expression. For more information about regular 

expressions, see 

Fundamentals Configuration Guide

. 

begin

: Displays the first line that matches the specified regular expression and all lines that follow. 

exclude

: Displays all lines that do not match the specified regular expression. 

include

: Displays all lines that match the specified regular expression. 

regular-expression

: Specifies a regular expression, a case-sensitive string of 1 to 256 characters. 

Usage guidelines 

A static link aggregation group is not aware of the partner's information. As a result, only the port 
number and operational key of a member port in a static aggregation group are displayed.

 

Examples 

# Display detailed link aggregation information for Ten-GigabitEthernet 1/0/1, a member port of a 

static aggregation group.  

<Sysname> display link-aggregation member-port Ten-GigabitEthernet 1/0/1 

Ten-GigabitEthernet1/0/1: 

Aggregation Interface: Bridge-Aggregation1 

Port Number: 1 

Summary of Contents for photosmart 850









































































































































Reviews:

No comments