HP photosmart 850 Page 77 Command Reference Manual Download

Page: 77 / 136

Default command level

1: Monitor level

Parameters

bridge-aggregation

: Displays the load sharing mode of the aggregation group corresponding to the

specified Layer 2 aggregate interface.

interface-number

: Specifies an existing Layer 2 aggregate interface by its number. The value range

varies by the device model. For more information, see

About the Command References for HP Unified

Wired-WLAN Products

: Filters command output by specifying a regular expression. For more information about regular

expressions, see

Fundamentals Configuration Guide

begin

: Displays the first line that matches the specified regular expression and all lines that follow.

exclude

: Displays all lines that do not match the specified regular expression.

include

: Displays all lines that match the specified regular expression.

regular-expression

: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Usage guidelines

If you do not specify the

interface

keyword, the command displays the global link-aggregation load

sharing modes.
If you specify the

interface

keyword, but do not specify an interface, the command displays all

group-specific load sharing modes.
If you specify the

bridge-aggregation

interface-number

option, the command displays the load sharing

mode of the specified aggregation group.
The

bridge-aggregation

keyword is available only when Layer 2 aggregate interfaces exist on the

device.

Examples

# Display the global link-aggregation load sharing mode.

<Sysname> display link-aggregation load-sharing mode

Link-Aggregation Load-Sharing Mode:

Layer 2 traffic: destination-mac address, source-mac address

# Display the link-aggregation load sharing mode of Layer 2 aggregation group 1.

<Sysname> display link-aggregation load-sharing mode interface bridge-aggregation 1

Bridge-Aggregation1 Load-Sharing Mode:

Layer 2 traffic: destination-mac address, source-mac address

Table 15

Command output

Field Description

Link-Aggregation Load-Sharing
Mode

Global link-aggregation load sharing mode.

•

By default, this field displays the link-aggregation load sharing mode

for Layer 2 traffic.

•

If you have configured the global link-aggregation load sharing

mode, this field displays the configured mode.

Summary of Contents for photosmart 850









































































































































Search results

Summary of Contents for photosmart 850

Reviews:

Related manuals for photosmart 850

Brands by name

Popular brands

HP photosmart 850, Command Reference Manual

Search results

Summary of Contents for photosmart 850

Reviews:

Related manuals for photosmart 850

Brands by name

Popular brands