HP Pavilion XZ200 Series Service Manual Download

Page: 39 / 105

2-16

Removal and Replacement

Technology Code IC)

Removing the Mini-PCI Card

(HP Authorized Service Providers Only)

Certain notebook models include a mini-PCI card that contains either a modem or combined modem
and 802.11 wireless.

Caution

Provide proper grounding and handle the card only by its edges, or you could damage it through
electrostatic discharge.

Required Equipment

•

#0 Phillips screwdriver.

Removal Procedure

1. Unplug the AC adapter, if present, and remove the battery.

2. On the bottom of the notebook, loosen the screw holding the mini-PCI cover (the cover may retain

the screw), and remove the cover.

3. Press outward to release the latches at the sides of the card, and carefully lift its free edge up.

4. Disconnect the cable(s) from the card.

5. Gently pull the card out of its connector.

Summary of Contents for Pavilion XZ200 Series










































































































Search results

Summary of Contents for Pavilion XZ200 Series

Reviews:

Related manuals for Pavilion XZ200 Series

Brands by name

Popular brands

HP Pavilion XZ200 Series, Service Manual

Search results

Summary of Contents for Pavilion XZ200 Series

Reviews:

Related manuals for Pavilion XZ200 Series

Brands by name

Popular brands