HP Pavilion XZ200 Series Service Manual Download

Page: 34 / 105

Technology Code IC)

Removal and Replacement

2-11

Removing the Keyboard

(User-Replaceable)

Required Equipment

•

#0 Phillips screwdriver.

•

Small flat-head screwdriver.

Removal Procedure

1. Unplug the AC adapter, if present, and remove the battery.

2. Remove the keyboard cover (page 2-9).

3. Loosen the three retaining screws along the top of the keyboard (the keyboard may retain the

screws).

Figure 2-8. Loosening the Keyboard Retaining Screws

Caution

When opening the keyboard, be careful not to pull on the ribbon cable that connects the keyboard
to the notebook.

4. Raise the top of the keyboard, then lift the keyboard up and out of the notebook.

5. Lay the keyboard face down on the top case, forward of its normal position, and disconnect the

ribbon cable from the motherboard.

Summary of Contents for Pavilion XZ200 Series










































































































Search results

Summary of Contents for Pavilion XZ200 Series

Reviews:

Related manuals for Pavilion XZ200 Series

Brands by name

Popular brands

HP Pavilion XZ200 Series, Service Manual

Search results

Summary of Contents for Pavilion XZ200 Series

Reviews:

Related manuals for Pavilion XZ200 Series

Brands by name

Popular brands