manualshive.com logo in svg

HP Pavilion XZ200 Series, Service Manual, Page: 85 / 105

Share
Download
HP Pavilion XZ200 Series Service Manual Download Page 85

3-22 

Troubleshooting and Diagnostics 

Technology Code IC) 

Diagnostic Tools 

This section describes the following diagnostic tools you can use for troubleshooting and repairing the 
notebook: 

• 

e-Diagtools diagnostic program (below). 

• 

Power-on self-test (page 3-25). 

• 

Sycard PCCtest 450 PC Card (page 3-26). 

• 

BIOS configuration utility (page 3-27). 

e-Diagtools Diagnostic Program 

The e-Diagtools hardware diagnostic program provides two levels of testing: 

• 

Basic user-level hardware test. 

• 

Advanced individual hardware tests. 

     

 

Figure 3-2. e-Diagtools Screens — Basic and Advanced 

The tests are designed to run after the system restarts, so that the notebook will be in a predictable 
state during the tests. The tests are non-destructive, and are intended to preserve the state of the 
notebook. The notebook restarts when you exit the program so drivers can be loaded. 

Updating e-Diagtools 

You can download the latest version of e-Diagtools from the HP Notebook web site (see page vi). 
Follow the instructions included with the new version. 

Summary of Contents for Pavilion XZ200 Series










































































































Reviews:

No comments