manualshive.com logo in svg

HP Pavilion XZ200 Series, Service Manual, Page: 53 / 105

Share
Download
HP Pavilion XZ200 Series Service Manual Download Page 53

2-30 

Removal and Replacement 

Technology Code IC) 

Removing the Hinge Saddles 

(HP Authorized Service Providers Only)

 

Required Equipment 

• 

#0 Phillips screwdriver. 

Removal Procedure 

1.  Unplug the AC adapter, if present, and remove the battery. 

2. Remove these additional assemblies: 

• 

Keyboard cover (page 2-9). 

• 

Keyboard (page 2-11). 

• 

Display assembly (page 2-18). 

• 

Top case (page 2-27). 

3.  Remove the retaining screws from the right hinge saddle, and lift the hinge saddle out of the 

notebook. 

4.  Remove the retaining screws from the left hinge saddle, and lift the hinge saddle out of the 

notebook. 

 

Caution 

Be careful not to damage the volume control PCA (if present) after removing the right hinge saddle. 
If excessive handling of the bottom case is anticipated, it is recommended that you remove the 
PCA to avoid accidentally displacing it. 

 

 

Summary of Contents for Pavilion XZ200 Series










































































































Reviews:

No comments