HP Pavilion XZ200 Series Service Manual Download

Page: 10 / 105

Technology Code IC)

Product Information

1-3

Features

The following illustrations show the notebook’s main external features. For an exploded view of the
notebook, see page 4-2.

Figure 1-1. Front View

1. One-Touch buttons (programmable).

2. Power

button.

3. Keyboard status lights: Caps Lock, Num Lock, CD

or DVD drive activity.

4. Touch pad/scroll pad on-off button (with on-off

indicators on either side).

5. Left and right click buttons.

6. Touch

pad.

7. Scroll

pad

8. Volume controls (selected models).

9. Mute button and indicator light (selected models).

10. Removable DVD or DVD/CD-RW drive.

11. CD/DVD eject button.

12. Speaker (one on each side).

13. Latch.

14. Built-in microphone.

Summary of Contents for Pavilion XZ200 Series










































































































Search results

Summary of Contents for Pavilion XZ200 Series

Reviews:

Related manuals for Pavilion XZ200 Series

Brands by name

Popular brands

HP Pavilion XZ200 Series, Service Manual

Search results

Summary of Contents for Pavilion XZ200 Series

Reviews:

Related manuals for Pavilion XZ200 Series

Brands by name

Popular brands