HP Pavilion XZ200 Series Service Manual Download

Page: 44 / 105

Technology Code IC)

Removal and Replacement

2-21

Figure 2-16. Removing Display Assembly Components

Reassembly Notes

•

Make sure the alignment hole in the inverter PCA fits over the corresponding post in the display
case.

•

Make sure the alignment hole in the wireless antenna fits over the corresponding post in the display
case.

•

Set the bezel in place on the display, then work your way around the bezel, firmly snapping the
bezel latches shut.

•

The rounded screw co

•

vers go on the screws at the top of the display bezel, and the flat covers go on the screws at the
bottom of the bezel.

Screw, M2×4mm

Screws,
M2×4mm (2)

Screws,
M2.5x6mm (4)

Inverter PCA

Bluetooth antenna

802.11b
antenna

Summary of Contents for Pavilion XZ200 Series










































































































Search results

Summary of Contents for Pavilion XZ200 Series

Reviews:

Related manuals for Pavilion XZ200 Series

Brands by name

Popular brands

HP Pavilion XZ200 Series, Service Manual

Search results

Summary of Contents for Pavilion XZ200 Series

Reviews:

Related manuals for Pavilion XZ200 Series

Brands by name

Popular brands