manualshive.com logo in svg

HP Omnibook XE3, Evaluator Manual, Page: 94 / 188

Share
Download
HP Omnibook XE3 Evaluator Manual Download Page 94

Using Windows XP
Installing Retail Windows XP

94

Corporate Evaluator’s Guide

Installing Retail Windows XP

Windows XP comes factory-installed on your HP notebook. The following procedure
installs a retail version of Windows XP. If you install a retail version of Windows XP,
you need to manually install the HP notebook-specific drivers.

This chapter describes how to:

•

 

Prepare for software installation.

•

 

Install a retail version of Windows XP.

•

 

Install video support.

•

 

Install audio support.

•

 

Install modem support.

•

 

Install integrated LAN support.

•

 

Install wireless LAN support.

•

 

Install HP Display Settings and Configuration Interface utilities.

•

 

Install touchpad support.

•

 

Install USB-to-serial dongle.

•

 

Install the OneTouch utility.

•

 

Install the Desktop Zoom utility.

•

 

Install the Java Virtual Machine.

•

 

Configure recommended power management.

Requirements

•

 

HP notebook

•

 

Windows XP CD-ROM

•

 

HP notebook Recovery CD

•

 

HP notebook drivers for Windows XP. Location: HP notebook Recovery CD in
\HP\DRIVERS\ or at www.hp.com.

Summary of Contents for Omnibook XE3





























































































































































































Reviews:

No comments