Using Windows 98
Installing Retail Windows 98 Second Edition
124
Corporate Evaluator’s Guide
To configure recommended Windows 98 Power Management
You may want to change the default power management settings in Windows 98. To
configure the power management do the following:
1.
Click Start, Settings, Control Panel, then double-click the Power Management icon.
2.
Select the Hibernate tab.
3.
Check “Enable hibernate support” then click Apply.
4.
Select the Power Schemes tab.
5.
Change the “Plugged in” options for Standby to “After 3 hours”.
6.
Select the Advanced tab.
7.
Change the Power buttons options to your desired settings.
Notice that the only way to hibernate the XE3 is to configure one of the power buttons to
perform this function.
8.
Select the Alarms tab and change the power level for Critical Battery Alarm to 5%.
9.
Click the “Alarm Action” button in the “Critical battery alarm” box.
10.
In the “Power level” box, choose Hibernate as the action for the computer to do
when the alarm goes off, click OK then click OK again.
Summary of Contents for Omnibook XE3
