HP Omnibook XE3 Evaluator Manual Download Page 150

Page: 150 / 188

Solving Problems with Your Computer
Troubleshooting Techniques

150

Corporate Evaluator’s Guide

Parallel and USB problems

If the parallel port is not working

•

Make sure the port connection is secure.

•

Check the port settings in Control Panel: open the hardware Device Manager, then
double-click Ports (COM & LPT).

•

Test the ports with e-Diagtools—see “Testing Hardware Operation“ on page 157.

If the USB port is not working

•

Contact the vendor of the peripheral device or check the HP notebook web site
(www.hp.com/notebooks) for the latest versions of the USB drivers and the driver for
the device.

•

Check the port settings in Control Panel: open the hardware Device Manager, then
double-click Universal Serial Bus Controller.

You may also want to test the USB port with e-Diagtools—see “Testing Hardware
Operation“ on page 157.

PC card (PCMCIA) problems

If the notebook doesn’t recognize a PC card

•

Remove and reinsert the PC card.

•

Restart the computer: click Start, Shut Down (or Turn Off Computer), Restart.

•

If the card requires an IRQ, make sure one is available:

•

In Windows 98, look in Control Panel, System, Device Manager, Properties,
Interrupt Request (IRQ).

•

In Windows 2000, look in Control Panel, Administrative Tools, Computer
Management, System Information, Hardware Resources, IRQs.

•

In Windows XP, look in Control Panel, Performance and Maintenance, System,
Hardware, Device Manager, View, Resources by Type.

•

Check the HP Customer Care web site (www.hp.com/go/support) for information
about installing certain PC cards.

Summary of Contents for Omnibook XE3





























































































































































































Search results

Summary of Contents for Omnibook XE3

Reviews:

HP Omnibook XE3, Evaluator Manual, Page: 150 / 188

Search results

Summary of Contents for Omnibook XE3

Reviews: