manualshive.com logo in svg

HP Omnibook XE3, Evaluator Manual, Page: 7 / 188

Share
Download
HP Omnibook XE3 Evaluator Manual Download Page 7

Corporate Evaluator’s Guide

7

To install a RAM expansion module .................................................................... 87
To remove a RAM expansion module .................................................................. 88
To replace the system RAM module..................................................................... 89

Expanding the Hibernate Partition (Windows 98)...................................................... 90
Updating Windows Drivers ........................................................................................ 91

Using Windows XP ......................................................................................................... 93

Installing Retail Windows XP .................................................................................... 94

Requirements ........................................................................................................ 94
To prepare for software installation ...................................................................... 95
To install retail Windows XP................................................................................ 96
To install video support......................................................................................... 97
To install audio support......................................................................................... 98
To install modem support ..................................................................................... 98
To install integrated LAN support ........................................................................ 98
To install wireless LAN support ........................................................................... 99
To install the HP Display Settings and Configuration  Interface (HPCI) utility... 99
To install touchpad support................................................................................. 100
To install support for the USB-to-serial dongle.................................................. 100
To install the OneTouch utility ........................................................................... 101
To install the Desktop Zoom utility .................................................................... 101
To install the Java Virtual Machine .................................................................... 101
To configure Windows XP power management ................................................. 101

Using Windows 2000 .................................................................................................... 103

Installing Retail Windows 2000 ............................................................................... 104

Requirements ...................................................................................................... 104
To prepare for software installation .................................................................... 105
To install retail Windows 2000 ........................................................................... 106
To install chipset support .................................................................................... 107
To install video support....................................................................................... 107
To install audio support....................................................................................... 107
To install modem support ................................................................................... 108
To install integrated LAN support ...................................................................... 108
To install touchpad support................................................................................. 109
To install the Intel® SpeedStep™ technology applet ......................................... 109
To install infrared support................................................................................... 109
To install the USB-to-serial dongle .................................................................... 110
To install HP Display Settings and Configuration  Interface (HPCI) ................. 111
To install the OneTouch utility ........................................................................... 111
To install the Desktop Zoom utility .................................................................... 112
To configure Windows 2000 power management .............................................. 112

Using Windows 98 ........................................................................................................ 113

Installing Retail Windows 98 Second Edition .......................................................... 114

Requirements ...................................................................................................... 114

Summary of Contents for Omnibook XE3





























































































































































































Reviews:

No comments