manualshive.com logo in svg

HP Omnibook XE3, Evaluator Manual, Page: 181 / 188

Share
Download
HP Omnibook XE3 Evaluator Manual Download Page 181

Specifications and Regulatory Information

Regulatory Information

Corporate Evaluator’s Guide

181

European Union

The equipment has been approved in accordance with Council Decision 98/482/EC for
pan-European single terminal connection to the public switched telephone network
(PSTN). However, due to differences between the individual PSTNs provided in different
countries, the approval does not, of itself, give an unconditional assurance of successful
operation on every PSTN network termination point.

In event of problems, you should contact your equipment supplier in the first instance.

This equipment has been designed to work in all of the countries of the European
Economic Area (Public Switched Telephone Networks). Network compatibility is
dependent on internal software settings. Contact your equipment supplier if it is
necessary to use the equipment on a different telephone network. For further product
support, contact Hewlett-Packard at the phone numbers provided in your Reference
Guide.

Belgium: For outdoor usage only channels 10 (2457 MHz) and 11 (2462 MHz) is
allowed. For private usage outside buildings across public grounds over less than 300m,
no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is
required for private usage outside buildings across public grounds over more than 300m.
An IBPT/BIPT license is required for public usage outside building. For registration and
license please contact IBPT/BIPT.

France: Restricted frequency band: only channels 10 and 11 (2457 MHz and 2462 MHz
respectively) may be used in France. License required for every installation, indoor and
outdoor installations. Please contact ART for the procedure to follow. Use with outdoor
installations not allowed.

Germany: License required for outdoor installations. Check with reseller for procedure
to follow

Netherlands: License required for outdoor installations. Check with reseller for
procedure to follow.

Italy: License required for indoor use. Use with outdoor installations not allowed.

Summary of Contents for Omnibook XE3





























































































































































































Reviews:

No comments