manualshive.com logo in svg

HP Omnibook XE3, Evaluator Manual, Page: 13 / 188

Share
Download
HP Omnibook XE3 Evaluator Manual Download Page 13

Introducing Your Computer

Comparing Omnibook XE3 Models

Corporate Evaluator’s Guide

13

Technology Code

GC

GD

GE

GF

Hard Disk Drive

5, 7.5, 10, 15, 20, 30
GB, PCI Bus Master,
E-IDE.

9.5 mm, 2.5 in.
Ultra DMA 33

10, 20, 30 GB, PCI
Bus Master, E-IDE.

9.5 mm, 2.5 in.
Ultra DMA 33/66

10, 20, 30 GB, PCI Bus Master, E-IDE.

9.5 mm, 2.5 in.
Supports Ultra DMA 33/66/100

Optical Drive

CD, CD-RW, DVD, or DVD/CD-RW

12.7 mm module.

DVD or DVD/CD-RW

12.7 mm module.

CD, CD-RW, DVD, or
DVD/CD-RW

12.7 mm module.

Display

800x600 SVGA 12.1”
TFT LCD

1024x768 XGA 13.3”,
14.1”, 15” TFT LCD

1400x1050 SXGA+
15” TFT LCD

800x600 SVGA 13”
HPA LCD

1024x768 XGA 13.3”,
14.1”, 15” TFT LCD

1024x768 XGA 13.3”,
14.1”, 15” TFT LCD

1400x1050 SXGA+
15” TFT LCD

1024x768 XGA 13.3”,
14.1”, 15” TFT LCD

1400x1050 SXGA+
15” TFT LCD

Audio

ESS Allegro (1988)

Optical drive with built-in control buttons and status display (selected models) allows for playing music
CDs while the system is turned off.

Two stereo speakers.
Built-in microphone.
Microphone and headphone jacks.

Communications

Lan: Accton 10/100 Ethernet

Modem: ESS Soft Modem 56Kbps

Lan: Intel integrated
10/100 Ethernet

Modem: ESS Soft
Modem 56Kbps

Wireless: Intersil
802.11

Input/Output

Serial, parallel (ECP/EPP), VGA, PS/2, mic-in, headphone-out, USB (2),
TV-out, RJ-11 modem, RJ-45 LAN (select models), infrared, docking port
(select models).

Parallel (ECP/EPP),
VGA, PS/2, mic-in,
headphone-out, USB
(2), TV-out, RJ-11
modem, RJ-45 LAN
(select models),
infrared, docking port
(select models), IEEE
1394 firewire (select
models), USB-to-
serial dongle.

Expandability

Two 16-/32-bit PC-Card slots

TI 1420 PCMCIA controller

Two 16-/32-bit PC-
Card slots

O2 Micron OZ6933
PCMCIA controller

Summary of Contents for Omnibook XE3





























































































































































































Reviews:

No comments