manualshive.com logo in svg

HP Omnibook XE3, Evaluator Manual, Page: 167 / 188

Share
Download
HP Omnibook XE3 Evaluator Manual Download Page 167

Specifications and Regulatory Information

Hardware and Software Specifications

Corporate Evaluator’s Guide

167

Hardware specifications

Note

Technology codes identify different models of a notebook PC. These two-letter codes
are found near the serial number on the bottom of the computer.

Physical
Attributes

Size:
13.03” x 10.76” x 1.59” (331 x 273.4 x 40.5mm) for 13.3”–14.1” TFT LCD
13.03” x 10.87” x 1.63” (342 x 276.6 x 41.5mm) for 15” TFT LCD
Weight: 7.2lbs (3.3kg) minimum

CPU

933- to 1200-MHz Intel Mobile Pentium III processor with Speed Step technology
–or–
866- to 933-MHz Intel Celeron processor

Core Logic

Intel 830-MG/ICH3-M and Intel VCH
PC133 compliant
Integrated VGA
SpeedStep II support

RAM

Two slots for RAM expansion (PC133) up to 384MB

Mass Storage

10- to 30-GB removable hard disk drive
1.44-MB floppy disk drive

CD/DVD drive

24X CD-ROM, 8X DVD, or other drive (or higher)

Graphics

13.3/14.1/15” XGA (1024x768) or 15” SXGA+ (1400x1050) TFT LCD display
Supports simultaneous LCD/CRT, LCD/CRT/TV operation
Integrated VGA
8- to 32-MB video memory (depending on model, shared with system memory)
Supports NTSC and PAL TV
Dual display for LCD and external monitor or TV

Keyboard and
Pointing
Devices

87/88/90-key spill-proof QWERTY keyboard with 101/102 key emulation
Embedded numeric keypad
12 function (Fn) keys
Touch pad with on/off button
Left and right click buttons, center scroll button

Audio

Built-in microphone
Two stereo speakers
CD player with built-in control buttons and status display (selected models)
Headphone-out and microphone-in

Summary of Contents for Omnibook XE3





























































































































































































Reviews:

No comments