manualshive.com logo in svg

HP nld, Manual

Share
Download
HP nld Manual Download Page 71

nld Options

nld and noft Manual — 520384-003

3- 11

-o

-o

Specifies the name of the output object file.

filename

is the name of the output file, either by name or (in the Guardian environment) by 
map DEFINE. This 

filename

 can be the same as the input filename. If linking is 

successful, 

nld

 deletes the input file and then writes the output file. An error 

occurs if you do not have permission to delete the input file.

If 

filename

 exists and is not in use, 

nld

 appends the listing to the file.

If filename exists and is in use, 

nld

 makes up to 10 attempts to change the name 

of filename to ZZND

nnnn

. If these 10 attempts fail, 

nld

 makes up to 10 attempts 

to create a new file named ZZND

nnnn

. If these 10 attempts also fail, no file 

containing the new information is created and 

nld

 reports an error.

If you do not specify a 

-o

 option, the default output filename is 

a.out

 in the OSS 

environment and 

AOUT

 in the Guardian environment.

The output file first created by 

nld

 has a temporary 

filename

 that is later renamed to 

either the default filename or the 

filename

 specified with the 

-o

 option. An abnormal 

termination of 

nld

 can produce a file with a temporary filename in the OSS 

environment. The OSS filename is of the form 

ZZNLDnnn

.

-r

Causes 

nld

 to create a linkfile instead of a loadfile. 

nld

 creates a loadfile by default.

See 

Native Object Files

 on page 1-2 for information on the characteristics of linkfiles 

and loadfiles.

-o filename

-r

Summary of Contents for nld











































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands