HP nld Manual Download Page 260

Page: 260 / 330

noft Diagnostic Messages

nld and noft Manual — 520384-003

11 -18

Warnings

Warnings

Warnings do not stop

noft

; therefore, the information under

Recovery

is merely a

correction you can make to eliminate the problem that causes each warning.

Cause.

The specified range of addresses or offsets goes outside the scope of the

procedure.

Recovery.

Remove the scoping of the procedure with

SET SCOPEPROC *

(see

SET

on page 5-42). Limit the range within the procedure.

Cause.

Stated in message.

Recovery.

Use

FILE or F

on page 5-15 to open an object file and then reissue the

command.

Cause.

The specified file was expected to be a COFF file, but it is not.

Recovery.

Specify a COFF file.

Cause.

The specified object file was created with later versions of native mode

compilers and linker than

noft

supports; therefore,

noft

might not understand the

object file format.

Recovery.

Use a newer version of

noft

*** WARNING *** [2000]:
End of offset outside of procedure, dumping to end of
procedure.

*** WARNING *** [2001]:
No object file open. No dumping currently possible.

*** WARNING *** [2002]:
Not a Tandem COFF file: filename.

*** WARNING *** [2003]:
Selected file has greater version number than noft.

Summary of Contents for nld











































































































































































































































































































































Search results

Summary of Contents for nld

Reviews:

Brands by name

Popular brands

HP nld, Manual

Search results

Summary of Contents for nld

Reviews:

Brands by name

Popular brands