manualshive.com logo in svg

HP nld, Manual

Share
Download
HP nld Manual Download Page 191

nld Diagnostic Messages

nld and noft Manual — 520384-003

10 -31

Fatal Errors

See 

-import

 on page 3-6.

This is an internal error. Please contact your service provider.

This is an internal error. Please contact your service provider.

This is an internal error. Please contact your service provider.

**** ERROR **** [1111]:
Two -import flags for the symbol named 'name' specified 
different SRL names.

**** ERROR **** [1112]:
You are trying to build a new version of an SRL with the 
-prev flag, and there is now a procedure named %n.  A symbol 
of this name was also exported in the previous version of the 
SRL, but in the previous version this was not the name of a 
procedure.  This incompatibility is considered an error.

**** ERROR **** [1113]:
You are trying to build a new version of an SRL with the 
-prev flag, and there is now an ordinary data item named %n.  
A symbol of this name was also exported in the previous 
version of the SRL, but in the previous version this was not 
the name of an ordinary data item.  This incompatibility is 
considered an error.

**** ERROR **** [1114]:
You are trying to build an SRL, and the actual size of the 
segment-ID segment is number-1 bytes, which is larger than 
the specified maximum size of number-2 bytes.

**** ERROR **** [1115]:
A -srl_ref flag was the last item found in the command stream 
or is followed by a '-'.  A <name> attribute must be 
specified for the -srl_ref flag.

Summary of Contents for nld











































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands