manualshive.com logo in svg

HP nld, Manual

Share
Download
HP nld Manual Download Page 199

nld Diagnostic Messages

nld and noft Manual — 520384-003

10 -39

Fatal Errors

This is an internal error. Please contact your service provider.

This is an internal error. Please contact your service provider.

**** ERROR **** [1157]:
You specified the -srl or -ul flag, but the input object file 
named 'filename' is COFF rather than ELF.  SRL's and UL's are 
not allowed with COFF input files, unless you also specify 
the -no_data_rearrange flag.

**** ERROR **** [1158]:
An error occurred trying to read the 'name' in the object 
file named 'filename'.  This might indicate that the object 
file is corrupted or otherwise unavailable.  error-number.

**** ERROR **** [1159]:
The object file named 'filename' appears to be corrupted 
because it has too many sections listed in the COFF file 
header.

**** ERROR **** [1160]:
Object files are either 'executable' or 'non-executable'.  
Only non-executable object files can be used as NLD input 
files.  However, 'filename' is executable.

**** ERROR **** [1161]:
The input object file named 'filename' contains object 
RTDU's, but NLD's input object files are non-executable files 
that should only contain source RTDU's, never object RTDU's.  
Object RTDU's are created by SQLCOMP, and SQLCOMP should only 
be used with executable files after they have been created by 
NLD, not with non-executable files that will be used as 
inputs to NLD.

**** ERROR **** [1162]:
The input object file named 'filename' has a bad value for 
the 'st_size' field in entry number of the ELF symbol table.

Summary of Contents for nld











































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands