HP nld Manual Download

Page: 250 / 330

noft Diagnostic Messages

nld and noft Manual — 520384-003

11- 8

Data Errors

Cause.

No undefined symbols exist in the current scope.

Recovery.

Examine the entire object file (instead of a procedure or source file) for

unresolved symbols information.

Cause.

There is an internal problem with

noft

Recovery.

Give the object file being examined and the series of commands that you

used to your service provider for analysis.

Cause.

The source file ended earlier than

noft

expected.

Recovery.

Ensure that you are working with the source files that built the object file.

Cause.

No source files are associated with this object file.

Recovery.

Rebuild the object file with symbols information.

Cause.

The specified object file was not compiled with a native compiler.

Recovery.

Rebuild the object file with a native compiler.

Cause.

The specified object file is not open.

Recovery.

Use

FILE or F

on page 5-15 to specify the object file and then reissue the

desired command.

*** DATA ERROR *** [1015]:
Did not find any undefined symbols matching scope.

*** DATA ERROR *** [1016]:
ELF and external symbol tables not consistent.

*** DATA ERROR *** [1017]:
End of file in source file.

*** DATA ERROR *** [1018]:
File descriptor table empty, unable to extract source file
names.

*** DATA ERROR *** [1019]:
Neither an ELF nor a Tandem COFF file: filename.

*** DATA ERROR *** [1020]:
No object file open.

Summary of Contents for nld











































































































































































































































































































































Search results

Summary of Contents for nld

Reviews:

Related manuals for nld

Brands by name

Popular brands

HP nld, Manual

Search results

Summary of Contents for nld

Reviews:

Related manuals for nld

Brands by name

Popular brands