manualshive.com logo in svg

HP nld, Manual

Share
Download
HP nld Manual Download Page 180

nld Diagnostic Messages

nld and noft Manual — 520384-003

10 -20

Fatal Errors

See 

-l or -lib

 on page 3-7.

See 

-l or -lib

 on page 3-7.

See 

-L or -libvol

 on page 3-8.

See 

-L or -libvol

 on page 3-8.

See 

-libname

 on page 3-9.

See 

-libname

 on page 3-9.

**** ERROR **** [1045]:
A -l or -lib flag was found at the end of the command stream, 
but a filename must be specified for the -lib flag.

**** ERROR **** [1046]:
A -l or -lib flag was found in the command stream, but a 
filename must be specified for the -lib flag, and the next 
item in the command stream begins instead with a hyphen.

**** ERROR **** [1047]:
A -L or -libvol flag was found at the end of the command 
stream, but a directory or subvolume name must be specified 
for the -libvol flag.

**** ERROR **** [1048]:
A -L or -libvol flag was found in the command stream, but a 
directory or subvolume name must be specified for the -libvol 
flag, and the next item in the command stream begins instead 
with a hyphen.

**** ERROR **** [1049]:
A -libname flag was found at the end of the command stream, 
but a filename must be specified for the -libname flag.

**** ERROR **** [1050]:
A -libname flag was found in the command stream, but a 
filename must be specified for the -libname flag, and the 
next item in the command stream begins instead with a hyphen.

Summary of Contents for nld











































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands