manualshive.com logo in svg

HP nld, Manual

Share
Download
HP nld Manual Download Page 230

nld Diagnostic Messages

nld and noft Manual — 520384-003

10 -70

Warnings

This is an internal warning. Please contact your service provider.

This is an internal warning. Please contact your service provider.

This is an internal warning. Please contact your service provider.

This is an internal warning. Please contact your service provider.

See 

-rename

 on page 3-12.

See 

-import

 on page 3-6.

See 

-import

 on page 3-6.

**** WARNING **** [10000]:
The value specified in the -d flag was rounded up to number.

**** WARNING **** [10001]:
The value specified in the -t flag was rounded up to number.

**** WARNING **** [10002]:
The value specified in the -kseg0 flag was rounded up to 
number.

**** WARNING **** [10003]:
The -cache_size flag is being ignored, because NLD now 
supports a different form of cache optimization, and the old 
form of cache optimization is obsolete.

**** WARNING **** [10004]:
You specified that the symbol named 'name' should be renamed, 
but this symbol was not defined in NLD's input files, so this 
-rename flag has been ignored.

**** WARNING **** [10005]:
You specified that the symbol named 'name' should be imported 
from an SRL, but this symbol was not referenced in NLD's 
input files, so the -import flag has been ignored.

**** WARNING **** [10006]:
You specified that the symbol named 'name' should be imported 
from an SRL, but this symbol is already defined in NLD's 
input files, so the -import flag has been ignored.

Summary of Contents for nld











































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands