manualshive.com logo in svg

HP nld, Manual

Share
Download
HP nld Manual Download Page 194

nld Diagnostic Messages

nld and noft Manual — 520384-003

10 -34

Fatal Errors

This is an internal error. Please contact your service provider.

This is an internal error. Please contact your service provider.

This is an internal error. Please contact your service provider.

**** ERROR **** [1126]:
The total size of the data, number-1 bytes, exceeds the 
maximum of number-2 bytes specified in the previous version 
of the SRL.

**** ERROR **** [1127]:
The total size of the entry vector segment, number-1 bytes, 
exceeds the maximum of number-2 bytes specified in the 
previous version of the SRL.

**** ERROR **** [1128]:
More than one procedure has the MAIN attribute.

**** ERROR **** [1129]:
The text and data segments overlap.  The text segments 
(meaning non-resident plus resident text) go from address-1 
to address-2, but the data segment starts at address-3.  
Check the values that you specified for the -t and -d flags.

**** ERROR **** [1130]:
The text and data segments overlap.  The data segment 
(meaning initialized plus uninitialized data) goes from 
address-1 to address-2, but the text segment starts at 
address-3.  Check the values that you specified for the -t 
and -d flags.

**** ERROR **** [1131]:
The symbol symbol was not found in 'filename', although the 
symbol table for this archive said it should be there.

**** ERROR **** [1132]:
The object file named 'filename' is a COFF object file with 
an unexpected 'magic number' in its 'optional header'.

Summary of Contents for nld











































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands