manualshive.com logo in svg

HP nld, Manual

Share
Download
HP nld Manual Download Page 210

nld Diagnostic Messages

nld and noft Manual — 520384-003

10 -50

Fatal Errors

See 

-strip

 on page 3-16.

See 

-strip

 on page 3-16.

See 

-strip

 on page 3-16.

See 

-strip

 on page 3-16.

See 

-strip

 on page 3-16.

See 

-change

 on page 3-4.

**** ERROR **** [1227]:
Cannot open the file named 'filename' specified in a -strip 
flag.

**** ERROR **** [1228]:
The file named 'filename' was specified for a -strip flag, 
but this file is an archive.  Only individual, executable 
object files can be stripped with the -strip flag.

**** ERROR **** [1229]:
The file named 'filename' was specified for a -strip flag, 
but this file is not executable.  Only executable object 
files can be stripped with the -strip flag.

**** ERROR **** [1230]:
The file named 'filename' which was specified for a -strip 
flag appears to be corrupted, because it contains an 
inconsistent subset of the expected symbols information.  
There are section headers for some, but not all, of the 
'mdebug', 'symtab', and 'strtab' sections.

**** ERROR **** [1231]:
The file named 'filename' which was specified for a -strip 
flag appears to be corrupted, because the symbols information 
is not in the expected format.  The sections named 'mdebug', 
'strtab', and 'symtab' do not appear sequentially in that 
order, on 16-byte boundaries.

**** ERROR **** [1232]:
Cannot open the file named 'filename' specified in a -change 
flag.

Summary of Contents for nld











































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands