HP nld Manual Download Page 255

Page: 255 / 330

noft Diagnostic Messages

nld and noft Manual — 520384-003

11 -13

Data Errors

Cause.

An internal table is corrupt.

Recovery.

Restart

noft

and reenter the command.

Cause.

Either the directory (

pathname

) specified in

on page 5-5 is not present or

the

subvolume-name

specified in the

SYSTEM or VOLUME

on page 5-48 is not

present.

Recovery.

Ensure that the specified directory or subvolume exists. Restart

noft

return to the default directory or subvolume.

Cause.

noft

cannot find a procedure in the object file.

Recovery.

Check the list of procedures to see if the procedure is in the object file. If

not, rebuild the object file.

Cause.

Either the specified file is not present or it is neither a text file nor an edit file.

Recovery.

Ensure that the path to the obey file is correct and that the obey file is a

text file (in the OSS environment and on UNIX workstations) or an edit file (in the
Guardian environment).

Cause.

Either the loadfile is stripped or the procedure table is corrupted.

Recovery.

Rebuild the loadfile without stripping.

*** DATA ERROR *** [1043]:
Unable to dump some unresolved items.

*** DATA ERROR *** [1044]:
Unable to locate current [directory|subvolume].

*** DATA ERROR *** [1045]:
Unable to find procedure in object file.

*** DATA ERROR *** [1046]:
Unable to open obey file: filename.

*** DATA ERROR *** [1047]:
Unable to read table-name procedure table, command ignored.

Summary of Contents for nld











































































































































































































































































































































Search results

Summary of Contents for nld

Reviews:

Brands by name

Popular brands

HP nld, Manual

Search results

Summary of Contents for nld

Reviews:

Brands by name

Popular brands