manualshive.com logo in svg

HP nld, Manual

Share
Download
HP nld Manual Download Page 134

noft Options

nld and noft Manual — 520384-003

5- 44

SET

HISTORYBUFFER [ history-buffer-number | ? ]

specifies the number of command lines in memory available to 

! (Exclamation 

Point)

 on page 5-4, 

FC

 on page 5-14, and 

HISTORY or H

 on page 5-20.

history-buffer-number

is an integer in the range 0 through 65,535 that specifies the number of 
command lines in the history buffer. The default is 50.

If the number specified is greater than the current number, 

noft

 is unable 

to retrieve command lines that have already left the history buffer. If the 
specified number is smaller than the current buffer size, the command lines 
deleted from the buffer are not retrievable.

?

returns the current history buffer size.

HISTORYWINDOW [ number | ? ]

specifies the number of command lines displayed with the 

HISTORY

 option.

number

is an integer in the range 0 through 

history-buffer-number

 that 

specifies the number of command lines displayed with the 

HISTORY

 

option. The default is 10.

?

returns the current history window size. 

LINES[number]

specifies the number of lines of output to display before pausing so that an 
area of output does not scroll out of the terminal or emulator display memory.

number

is an integer in the range 0 through 32,767. Its default value is 0 (zero). A 
zero value causes output to continue until all results are displayed.

The value used when you specify 

number

 is an approximation; a single 

line of 

noft

 output can result in multiple lines of output on a screen, so 

more lines than specified might be displayed.

Note.

This parameter is useful only in an interactive session, because options given in 

the command line are not stored in the history buffer.

Note.

This parameter is useful only in an interactive session, because options given in 

the command line are not stored in the history buffer.

Summary of Contents for nld











































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands