manualshive.com logo in svg

HP nld, Manual

Share
Download
HP nld Manual Download Page 238

nld Diagnostic Messages

nld and noft Manual — 520384-003

10 -78

Informational Messages

**** INFORMATIONAL MESSAGE **** [20004]:
The '-yflag' symbol named 'name' is defined in the input 
object file named 'filename'.

**** INFORMATIONAL MESSAGE **** [20005]:
The input object file named 'filename' does not have all the 
expected gp tables.

**** INFORMATIONAL MESSAGE **** [20006]:
There was a problem with GP-relative addressing, but some of 
the input object files lack gp tables, so the calculation of 
the best -G value will be unreliable.

**** INFORMATIONAL MESSAGE **** [20007]:
There was a problem related to GP-relative addressing, but in 
fact there was no gp-relative addressing, so any value of -G 
should lead to the same problem.

**** INFORMATIONAL MESSAGE **** [20008]:
There was a problem related to GP-relative addressing, but in 
fact the amount of data that would be put into 'small' data 
even for a -G value of 0 was larger than 64K bytes, so any 
value of -G should lead to the same problem.

**** INFORMATIONAL MESSAGE **** [20009]:
There was a problem related to GP-relative addressing, but in 
fact all the data will fit into 'small' data with GP-relative 
addressing.  Specify a value of -G that is at least as large 
as 'number'.

**** INFORMATIONAL MESSAGE **** [20010]:
There was a problem related to GP-relative addressing.  
Specify a value of -G no larger than 'number' so that all the 
GP-relative data will fit into 'small' data.

**** INFORMATIONAL MESSAGE **** [20011]:
The -G value recommended in the previous message is 
conservative because of inconsistent common symbol sizes.

Summary of Contents for nld











































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands