manualshive.com logo in svg

HP nld, Manual

Share
Download
HP nld Manual Download Page 173

nld Diagnostic Messages

nld and noft Manual — 520384-003

10 -13

Fatal Errors

This is an internal error. Please contact your service provider.

This is an internal error. Please contact your service provider.

This is an internal error. Please contact your service provider.

This is an internal error. Please contact your service provider.

This is an internal error. Please contact your service provider.

See:

•

-change

 on page 3-4.

•

-set

 on page 3-13

**** ERROR **** [1004]:
The unknown flag 'flag-name' was encountered on line 
line-number in the -hot_proc_list file 'filename'.

**** ERROR **** [1005]:
A syntax error (two periods within a procedure name?) was 
encountered on line line-number in the -hot_proc_list file 
'filename'.

**** ERROR **** [1006]:
A procedure name longer than 256 characters was encountered  
on line line-number in the -hot_proc_list file 'filename'.

**** ERROR **** [1007]:
There was no -pre_cache_size flag within the -hot_proc_list 
file 'filename', but the -pri_cache_size flag is required 
because some procedure names were specified with cache 
offsets.

**** ERROR **** [1008]:
There was no -res_start flag within the -hot_proc_list file 
'filename', but the -res_start flag is always required.

**** ERROR **** [1009]:
The unknown attribute name 'attribute-name' was encountered 
in a -set or -change flag.

Summary of Contents for nld











































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands