manualshive.com logo in svg

HP nld, Manual

Share
Download
HP nld Manual Download Page 237

nld Diagnostic Messages

nld and noft Manual — 520384-003

10 -77

Informational Messages

Informational Messages

Characteristics of informational messages:

•

Provide information that might help you

•

Allow 

nld

 to complete normally

•

Are issued if the flag 

-verbose on page 3-16

 is specified

•

Are suppressed if the flag 

-noverbose

 on page 3-10 is specified

For 

-verbose

 and 

-noverbose

 defaults, see 

Table 10-2

 on page 10-1.

This is an internal message. Please contact your service provider.

This is an internal message. Please contact your service provider.

Note.

In this subsection, informational messages are as they appear on Guardian and OSS 

platforms; that is, they begin with this string:

**** INFORMATIONAL MESSAGE **** [number]

On a PC, error messages begin with this string:

NLD: INFORMATIONAL MESSAGE **** [number]

**** INFORMATIONAL MESSAGE **** [20000]:
The -old_elf_format flag will soon go away.

**** INFORMATIONAL MESSAGE **** [20001]:
The amount of space actually required by the non-resident 
text segment during the cache optimization was number bytes.

**** INFORMATIONAL MESSAGE **** [20002]:
The input object file named 'filename' has broken the rules 
that should be followed so that NLD has more freedom to 
rearrange data.  This message has been printed in response to 
the -show_internal_reloc flag.

**** INFORMATIONAL MESSAGE **** [20003]:
The '-yflag' symbol named 'name' has an external declaration 
in the input object file named 'filename'.

Summary of Contents for nld











































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands