manualshive.com logo in svg

HP nld, Manual

Share
Download
HP nld Manual Download Page 166

nld Diagnostic Messages

nld and noft Manual — 520384-003

10- 6

Terms That Appear in nld Diagnostic Messages

hexadecimal number.

When a hexadecimal number is to be specified on the 

nld

 

command line, it should begin with 0x or 0X, followed by a string of hexadecimal digits, 
which include the decimal digits 0–9 and the letters A–F (or a–f), which represent the 
values 10–15. When 

nld

 expects a hexadecimal number for an address, the 0x or 0X 

can be omitted. In other situations, however, 

nld

 assumes the number is decimal if the 

0x or 0X is omitted.

informational message.

This is a message that merely provides information, instead of 

reporting an error. 

nld

 does not consider the information to be a sign that anything 

might be wrong.

initialized data.

Data is initialized if it has an initial value that is present in the object file and 

therefore is also present in virtual memory when the program begins execution. Note 
that read-only data can also be considered initialized.

internal error.

An internal error indicates an 

nld

 problem that should be reported to HP 

personnel for further analysis.

jump instruction.

If an error related to the relocation of jump instructions occurs during 

SYSGEN, it probably indicates a problem with the way the object files were prepared; it 
is beyond the scope of this manual to give advice related to building object files for 
system library.

large data.

Data is categorized as “large” or “small.” The compiler decides if a given data 

item will be large or small. See a more comprehensive discussion under small data.

library.

This term can mean either an archive or an SRL.

local symbol information/local symbol table.

The local symbol table is part of the symbol 

table in an object file. It primarily contains local symbol information needed only by the 
debugger, not by 

nld

, and that can be selectively removed by 

-x

 on page 3-17.

main.

It is possible to indicate at compilation time that a procedure has the “main” attribute, 

which means that it is the main entry point to begin execution of the program. This is 
typically done by users of pTAL, but not other languages, as other languages provide 
their main procedure behind the scenes, to be linked together with the code written by 
the user.

nld

 always considers it an error if more than one procedure has the “main” attribute.

The main entry point for a program can also be specified with 

-elf_check

 on page 3-5, 

but it is not expected that the typical user would need this.

nonresident text.

Text (that is, code) is called nonresident to distinguish it from resident 

text.

NonStop SQL/MP.

NonStop SQL/MP is the HP implementation of a relational database 

management system that uses the industry-standard Structured Query Language 
(SQL) to define and manipulate data.

Summary of Contents for nld











































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands