Figure 45 Alignment Holes in Processor Slot 0
3.
Slide the processor sequencer to the right and hold it to uncover the ZIF socket.
4.
Tighten the ZIF socket with the with the 2.5-mm hex end of the processor installation tool by
turning the socket 180 degrees clockwise.
See
Figure 46
.
Figure 46 ZIF Socket on Processor Slot 0
5.
Release the processor sequencer.
6.
Tighten the captive shoulder screws (1 - 4) on the processor heat sink with the Torx T-15
screwdriver.
See
Figure 47 (page 119)
.
7.
Tighten the captive screws (5 - 6) on the processor with the Torx T-15 screwdriver.
118
Removing and Replacing Components
